What happens when we dress "Too Slow"

Grains Too Smooth

1. Poor cutting action
2. Chatter Marks
3. Burning & Cracks

What happens when we dress an "Idle Pass"

Sharp points on wheel grains are made blunt

1. Poor cutting action
2. Unevenness (Waviness)

When Dressed with a high depth of cut

Grains Broken & Pulled out

1. Very rough finish
2. Wheel get loaded too soon

What happens when we dress "Dry"

Grains pulled out Due to bond failure

1. Very rough finish
2. Change in griund from & taper
3. Wheel will get loaded

What happens when we dress correctly

1. Sharp edges on grains
2. No cavities